1. Tin-lead hot air leveling
Application: The current application is limited to products exempted from the RoHS Directive and military products, such as communication products of the single board (Line card) and backplane (Back plane) for the device pin centre distance Greater than or equal to 0.5mm PCBA
Compatibility with lead-free: not compatible, but can be used as a surface treatment for line cards for telecommunication products.
Shelf life: 12 months.
<0.5mm, as="" they="" are="" prone="" to="">0.5mm,>
Due to the relatively large relative thickness of the plating, the drilled hole diameter (DHS) must be compensated for to obtain the desired finished metallisation hole diameter (FHS), typically FHS=DHS - 4 to 6 mil.
2. Lead-free hot air leveling
Application: alternative to SnPb HASL, suitable for PCBA with device pin centre distance Greater than or equal to 0.5mm.
Compatibility with Pb-free: compatible.
Shelf life: 12 months.
<0.5mm apart,="" as="" they="" are="" prone="" to="">0.5mm>
Due to the relatively large relative thickness of the plating, the drilled hole diameter (DHS) must be compensated in order to obtain the desired finished metallisation hole diameter (FHS), typically FHS=DHS - 4 to 6 mil.
Supplier resources: currently limited, but will increase with the development of using lead-free processes.
3. Plain organic protective coatings
<0.63mm) and="" devices="" with="" relatively="" high="" requirements="" for="" solder="" tray="" coplanarity="" due="" to="" its="" flat="" surface="" and="" high="" solder="" joint="">0.63mm)>
Compatibility with lead-free: compatible.
Shelf life: 3 months.
Poor thermal stability. After the first reflow soldering, the rest of the soldering operation must be completed within the period specified by the OSP manufacturer (generally 24h).
4. High temperature organic protective coating
Applications: Used as a replacement for OSP- -stand, suitable for more than 3 soldering operations. Recommended for installations with a large number of fine-pitch devices (<0.63mm) and="" for="" products="" with="" a="" high="" requirement="" for="">0.63mm)>
Compatibility with lead-free: compatible.
Shelf life: 3 months.
After the initial reflow soldering, the rest of the soldering operation must be completed within the period specified by the OSP manufacturer. Usually required within 24h.
5. Nickel/gold plating (soldering)
Applications: mainly used for / non-soldering electroplated nickel and gold selective plating use.
Compatibility with lead-free: compatible.
Shelf life: 12 months.
6. Non-soldering electroplated nickel/gold (hard gold)
Application: For use on gold fingers, rail mounting edges and other wear-resistant requirements.
Compatibility with lead-free: compatible.
Shelf life: 12 months.
Disadvantages: non-solderable.

